Civic Sedan L4-1.5L SOHC (VTEC) (1995)
/Page-1068001.png)
Vacuum Brake Booster: Service and Repair
Removal and Installation
1. Remove master cylinder as outlined under Master Cylinder, Brakes.
2. Disconnect vacuum hose from booster, then remove vacuum hose bracket.
3. Loosen pushrod locknut, then remove the cotter pin and clevis pin.
4. Remove clevis from operating rod of booster.
5. Remove four booster mounting nuts, then remove booster from engine compartment.
6. Reverse procedure to install. Adjust pushrod length before installing booster.