Civic Sedan L4-1.6L SOHC (VTEC) (1996)
Front Door Latch: Service and Repair
Front Door
NOTE: Raise the glass fully.
1. Remove:
-
Door panel
-
Plastic cover
-
Outer handle
2. Remove the bolt, then move the center lower channel forward.
3. Disconnect the connector, and detach the harness clip from the door. Remove the latch through the hole in the door.
NOTE: Take care not to bend the inner handle rod, outer handle rod, cylinder rod and lock rod.
4. Installation is the reverse of the removal procedure.
NOTE:
-
Make sure the inner handle rod and connector are connected properly.
-
Make sure the door locks and opens properly.