Civic Sedan L4-1.6L SOHC (VTEC) (1996)
4. When replacing the front wheelhouse.
-
Center punch around the spot weld imprints on the front side frame and damper housing.
-
Drill holes in the center punched areas using a spot cutter.
-
Using a chisel, pry off the welded flange.
-
Level and finish the burrs on the welding surfaces with a sander.
5. When replacing the damper housing and front wheelhouse as an assembly.
-1 Remove the wheelhouse upper member.
-
Center punch around the spot weld imprints.
-
Use the special spot cutter to drill holes at the spot weld nuggets.
-
Remove the MIG weld flange with a disc sander.
WARNING: To prevent eye injury, wear goggles or safety glasses whenever sanding, cutting or grinding.
-
Using a chisel, pry off the welded flange from the front pillar and damper housing.
NOTE: Remove the wheelhouse upper member carefully so they can be reused.