Civic Sedan L4-1.6L SOHC (VTEC) (1996)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
When installing and tightening the pulley, follow the procedure below.
Clean, remove any oil, and lubricate points shown.
Crankshaft pulley bolt size and torque value:
14 x 1.25 mm
20 Nm (2.0 kgs.cm, 14 ft.lbs.) + 90°
NOTE: Do not use an impact wrench when installing.
1. Tighten the pulley bolt to the specified torque.
Torque: 20 Nm (2.0 kgs.cm, 14 ft.lbs.)