Civic Sedan L4-1.6L SOHC (VTEC) (1996)
Remove the two Torx bolts using a Torx T30 bit, then remove the driver's airbag.
CAUTION: Be sure to install the SRS wiring so that it is not pinched or interfering with other parts.
4. Install the new airbag(s):
Place the driver's airbag into the steering wheel, and secure it with new Torx bolts.
5. Reconnect the airbag connector(s).
Connect the driver's airbag 2P connector to the cable reel 2P connector, then install the access panel on the steering wheel.