Civic Sedan L4-1.6L SOHC (VTEC) (1996)
/Page-2077002.png)
1.
Remove the driver's lower dashboard cover.
2.
Remove the knee bolster.
3.
Cut two 20 x 20 mm pieces of EPT Sealer 10T.
4.
Peel oft the backing, and attach the EPT Sealer 10T to the areas on opposite sides of both bolster clips.
5.
Reinstall the bolster and tighten its two bolts to 9.8 Nm (7.2 lb-ft).
6.
Reinstall the driver's lower dashboard cover.
