Civic Sedan L4-1.6L SOHC (VTEC) (1996)
25. Use the special tool to separate the ball joint and knuckle.
NOTE: If necessary, apply penetrating type lubricant to loosen the ball joint.
26. Pull the knuckle outward and remove the driveshaft outboard joint from the knuckle by tapping the driveshaft end with a plastic hammer, then
remove the knuckle.
NOTE: Replace the bearing with a new one after removal.
27. Separate the wheel hub from the knuckle using the special tools and a hydraulic press.
CAUTION:
-
Take care not to distort the splash guard.
-
Hold onto the wheel hub to keep it from falling when pressed clear.
-
To prevent damage to the tool, make sure the threads are fully engaged before pressing.