Civic Sedan L4-1.6L SOHC (VTEC) (1996)
/Page-1811006.png)
7. Set the pump cam ring over the two rollers with the " - " mark on the cam ring upward.
8. Assemble pump rotor to the pump cover with the " - " marks on the rotor facing down.
9. Set the 10 vanes in the grooves in the rotor.
NOTE: Be sure that the round ends of the vanes are in contact with the sliding surface of the cam ring.
10. Coat the O-ring with power steering fluid, and install it into the grooves in the side plate.
