Civic Sedan L4-1.6L SOHC (VTEC) (1996)
/Page-1840015.png)
19. Apply power steering fluid to the seal ring lip of the valve oil seal, then install the seal in the valve housing using a hydraulic press and special
tools as shown.
CAUTION: Install the valve oil seal with its grooved side facing the tool.
20. Press the new bearing into the valve housing using a hydraulic press and special tool as shown.
NOTE: Place the roller bearing on the valve housing with the stamped letter facing up towards the valve side.
21. Apply vinyl tape to the pinion shaft, then coat the vinyl tape with power steering fluid.
