Civic Sedan L4-1.6L SOHC (VTEC) (1996)
/Page-1289001.png)
Mainshaft: Testing and Inspection
A/T Only
CLEARANCE MEASUREMENT
NOTE: Lubricate all parts with ATF during assembly.
1. Remove the mainshaft bearing from the transmission housing.
2. Assemble the parts below on the mainshaft.
NOTE: Do not assemble the O-rings during inspection.
3. Torque the mainshaft locknut to 29 Nm (22 ft. lbs.).
NOTE: Mainshaft locknut has left-hand threads.
