Civic Sedan L4-1.6L SOHC (VTEC) (1996)
12. Remove the lower valve body assembly (eight bolts).
13. Install the new lower valve body in the reverse order of the removal procedure.
CAUTION: Keep all of other foreign particles out of the transmission.
NOTE:
-
Replace the following parts:
-
O-rings on the solenoid harness connector and the ATF strainer
-
ATF pan gasket
-
Sealing washers
-
If the ATF cooler inlet line bracket is bent or warped, put it back to the original position.
14. Perform the start clutch calibration procedure.