Civic Sedan L4-1.6L SOHC (VTEC) (1996)
-
Never touch the primed surfaces with your hands.
-
Mask off the rear side trim panel before painting the flange.
9. Thoroughly mix the adhesive and hardener together on a glass or metal plate with a putty knife.
NOTE:
-
Clean the plate with a sponge and alcohol before mixing.
-
Follow the instructions that came with the adhesive.
10. Before filling a cartridge, cut the end of the nozzle as shown.
11. Pack adhesive into the cartridge without air pockets to ensure continuous delivery. Put the cartridge in a caulking gun, and run a bead of adhesive
around the edge of the quarter glass as shown.
NOTE:
-
If the old quarter glass is to be reinstalled, peel the separator off the butyl tape after applying the adhesive.
-
Apply the adhesive within 30 minutes after applying the glass primer.