Civic Sedan L4-1493cc 1.5L SOHC (D15B2) TBI (1989)
6.
Starting at the front of the tumbler holder, insert the new tumblers. Alternating from top to bottom, they should be installed in the order they
appear in the Key Code. Verify the coil springs are in place before inserting the tumblers.
7.
Insert the customer's key into the tumbler holder. If properly re-keyed, all tumblers should be flush with the body of the holder. If any stick out,
recheck that tumbler's number against the key code.
8.
When the tumbler holder is correctly re-keyed, assemble the cylinder in reverse order of disassembly.
9.
Using the improved rubber grommet listed under PARTS INFORMATION, install the new cylinder assembly in the car and test its operation.
10.
Lubricate the new lock cylinder by spraying WD-40 into the key opening. Use a nozzle to insure penetration.
PARTS INFORMATION
Description
Part Number
H/C
Cylinder
74812-SH3-013
3063419
Rubber Grommet
74815-SH3-020
3111770
Tumblers (Bag of 25)
Number 1
74834-SH3-305
3177383
Number 2
74835-SH3-305
3177391
Number 3
74836-SH3-305
3177409
Number 4
74837-SH3-305
3177417
Number 5
74838-SH3-305
3177425
Number 6
74839-SH3-305
3177433
Tumbler Springs
(Bag of 25)
74832-SH3-305
3177441
Outer Cap
74833-SH3-305
3177458
WARRANTY CLAIM INFORMATION
Operation number:
823145
Flat rate time:
0.6 hour
Failed part number:
74812-SH3-003 H/C 2703270
Defect code:
023
Contention code:
B99
Technical Service Bulletin # 89010
Date: 890224
Lock - Tailgate Lock Difficult to Open With Key Corroded
Model
Applicable To