Civic Sedan L4-1493cc 1.5L SOHC (D15B2) TBI (1989)
Fig. 12 Aligning Booster Piston To Rear Housing
10.
Install booster piston on rear housing aligning their tabs and slots, Fig. 12.
11.
Install rubber boots on through bolts being careful not to damage them.
12.
Apply silicone grease to bore of booster piston and reaction rubber, then install reaction plate, reaction rubber, output rod and rod stopper on
booster piston.
13.
Place booster spring and spring retainer on rear housing, then compress booster spring and install 10 millimeter snap rings on through bolts.
Fig. 13 Installing Seals On Spring Retainer
14.
Install washers and seals on through bolts, Fig. 13.
15.
Install front housing and secure with E-clips.
16.
Install booster as described under REMOVAL/INSTALLATION.