Civic Sedan L4-1493cc 1.5L SOHC (D15B2) TBI (1989)
10.
Reconnect the remaining wires to the igniter.
NOTE:
If any connector does not fit tightly on an igniter terminal, squeeze the connector and with a pair of pliers to reduce the clearance.
11.
Reinstall the wire holder screw. Reinstall the rotor, leak cover, and distributor cap.
12.
Install the distributor in the car with a new O-ring. Do not fully tighten the hold-down bolts.
13.
Reconnect the 2-P and 6-P or 8-P connectors and the spark plug wires.
14.
Adjust the ignition timing according to the procedure in the service manual.
15.
Center-punch a completion mark above the second character ("H") of the engine compartment VIN.
PARTS INFORMATION
Igniter Kit:
P/N 06302-PT2-000
H/C 4124814
O-ring:
P/N 30110-PA1-732
H/C 1126457