Civic Sedan L4-1590cc 1.6L SOHC (D16A6) MFI (1990)
High Pressure Safety Valve HVAC: Service and Repair
Compressor (Sanden)
RELIEF VALVE REPLACEMENT
REMOVAL
NOTE: Make sure the suction and discharge joints are plugged with caps.
1. Clean any built-up dirt from the compressor in the area of the relief valve.
2. Remove the relief valve, 0-ring, relief valve seal.
CAUTION: Do not draw compressor oil. Make sure there is no foreign matter in system.
INSTALLATION
1. Clean off the mating surface.
2. Apply compressor oil to the O-ring.
3. Tighten the relief valve.
Torque: 10 Nm (1.0 kg-m)
4. Check for leaks, and attach the relief valve seal.