honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Sunroof / Moonroof Cable Housing|Service and Repair|Page 6441 > < Sun Shade|Service and Repair|Page 6437
Page 1
background image

Sunroof / Moonroof Cable Housing: Service and Repair

Drain Channel Slider and Cable Assembly Replacement

1. Remove the frame.
2. Remove these parts from the frame:

-

Sunshade

-

Moonroof motor

3. Put on gloves to protect your hands. Remove the screws (A, B), then remove the slide stops (C) and cable tube rear brackets (D). Remove the bolts

(E) from the cable tube side bracket (F) and the cable tube mounting screws (G) from both sides of the frame (H).

4. Detach the open switch connector clip (I) from the frame.

5. Pivot the glass bracket (A) down by sliding the link lifter (B) back, then slide both glass brackets back with the link lifter.

Sunroof / Moonroof Cable Housing|Service and Repair|Page 6441 > < Sun Shade|Service and Repair|Page 6437