Civic Si L4-2.0L (2004)
9. Remove the camshaft holders. Measure the widest portion of plastigage on each journal.
^
If the camshaft-to-holder clearance is within limits, go to step 11.
^
If the camshaft-to-holder clearance is beyond the service limit and the camshaft has been replaced, replace the cylinder head.
^
If the camshaft-to-holder clearance is beyond the service limit and the camshaft has not been replaced, go to step 10.
Camshaft-to-Holder Oil Clearance:
Standard (New):
No. 1 Journal: 0.030 - 0.069 mm (0.001 - 0.003 inch)
No. 2, 3, 4, 5 Journals: 0.060 - 0.099 mm (0.002 - 0.004 inch)
Service Limit: 0.15 mm (0.006 inch)
10. Check the total runout with the camshaft supported on V-blocks.
^
If the total runout of the camshaft is within the service limit, replace the cylinder head.
^
If the total runout is beyond the service limit, replace the camshaft and recheck the camshaft-to-holder oil clearance. If the oil clearance is still
beyond the service limit, replace the cylinder head.
Camshaft Total Runout:
Standard (New): 0.03 mm (0.001 inch) max.
Service Limit: 0.04 mm (0.002 inch)
11. Measure cam lobe height.
Cam Lobe Height Standard (New):
