honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Knock Sensor > < Mode 1 Test|Page 2557
Page 2
background image

4. Reconnect the connectors to the under-dash fuse/relay box, turn the ignition switch ON (II) to keep the system awake and make sure these input

tests at the appropriate connectors on the under-dash fuse/relay box.
-

If any test indicates a problem, find and correct the cause, then recheck the system.

-

If all the input tests prove OK, the multiplex control unit must be faulty. Replace the under-dash fuse/relay box assembly.

Knock Sensor > < Mode 1 Test|Page 2557