Civic Si L4-2.0L (2004)
3. Remove the hub cap (A), raise the stake (B), and remove the spindle nut (C).
4. Release the parking brake lever.
5. Remove the brake hose mounting bolt (A).
6. Remove the caliper bracket mounting bolts (B), and hang the caliper (C) to one side. To prevent damage to the caliper or brake hose, use a short
piece of wire to hang the caliper from the undercarriage.
7. Remove the brake disc retaining screws (A).
8. Screw two 8 x 1.25 mm bolts (B) into the disc (C) to push it away from the hub. Turn each bolt two turns at a time to prevent cocking the disc
excessively. Remove the brake disc.
9. Remove the hub bearing unit (A) from the spindle.
