honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Power Door Lock Control Module > < Driver's Door
Page 1
background image

Power Door Lock Actuator: Testing and Inspection
Passenger's Door

1. Remove the passenger's door panel.

2. Disconnect the 2P connector from the actuator.

NOTE:  The front passenger's door lock actuator is shown; the left rear and right rear door lock actuators are similar.

3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only

momentarily.

4. If the actuator fails to work properly, replace it.

Power Door Lock Control Module > < Driver's Door