Civic VP Sedan L4-1590cc 1.6L SOHC MFI (1999)
Hydraulic Control Assembly - Antilock Brakes: Service Precautions
CAUTION:
-
Do not spill brake fluid on the car; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
-
Take care not to damage or deform the brake lines during removal and installation.
-
To prevent the brake fluid from flowing, plug and cover the hose ends and joints with a shop towel or equivalent material.
WARNING:
-
Accumulator retains brake fluid under high pressure. Relieve high pressure through maintenance bleeder prior to performing service on the ABS
Modulator or Power unit, otherwise personal injury may result.
-
The ABS Accumulator contains high pressure nitrogen gas. Do not puncture, expose to the flame, or attempt to disassemble the accumulator or it
may explode, resulting in severe personal injury.