Civic VP Sedan L4-1590cc 1.6L SOHC MFI (1999)
Evaporator Case: Service and Repair
Removal and Installation
1. Move the temperature control to "HOT."
'96-98: Slide the temperature control lever.
'99-00: Turn the ignition switch ON (II), then turn the temperature control knob. Turn the ignition switch off.
2. Remove the battery.
3. Recover the refrigerant with a recovery/recycling/charging station .
4. Remove the bolts, then disconnect the suction and receiver lines from the evaporator.
NOTE: Plug or cap the lines immediately after disconnecting them to avoid moisture and dust contamination.
5. Remove the glove box .
6. Remove the self-tapping screw and the passenger's dashboard lower cover. Remove the bolt, the nut and the knee bolster, then remove the five
bolts and the glove box frame.