Civic VP Sedan L4-1590cc 1.6L SOHC MFI (1999)
68. Install new boot bands on the boot, and bend both sets of locking tabs.
CAUTION: Stake the band locking tabs firmly.
69. Lightly tap on the doubled-over portions to reduce their height.
70. Slide the rack right and left to be certain that the boots are not deformed or twisted.
71. Connect the air tube between the right and left boot.
72. Install the clips on the cylinder lines, then clamp the air tube with the clips.
Installation
CAUTION: Be careful not to bend or damage the feed line and cylinder lines when installing the gearbox.
1. Before installing the gearbox, slide the rack ail the way to right.
2. Install the mounting cushion on the steering gearbox.
3. Install the pinion shaft grommet, then insert the pinion shaft up through the bulkhead.
NOTE: Align the notch in the pinion shaft grommet with the tab on the valve housing.
