Civic VP Sedan L4-1590cc 1.6L SOHC MFI (1999)
Control Arm Bushing: Service and Repair
Upper Control Arms, Rear
1. Remove the upper arm bushing and inner bushing as shown.
2. Mark a scribe line on the upper arm inner bushing so that it is in line with the bolt mounting surface.
3. Mark on the upper arm at two points so that they are in line and make a right angle with the arm as shown.
4. Drive in the upper arm inner bushing with the marks aligned.
5. Drive the upper arm bushing into the upper arm.
NOTE: Drive in the upper arm bushing and inner bushing until their leading edges are flush with the upper arm.