honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Removal and Replacement Strut|Page 6479 > < Removal and Replacement Strut|Page 6477
Page 6
background image

6. Lower the rear suspension, and remove the damper.

DISASSEMBLE 

1. Compress the damper spring with the spring compressor according to the manufacturer's instructions, then remove the self-locking nut.

CAUTION:  Do not compress the spring more than necessary to remove the self-locking nut.

2. Release the pressure from the spring compressor, then disassemble.

Removal and Replacement Strut|Page 6479 > < Removal and Replacement Strut|Page 6477