Civic VP Sedan L4-1590cc 1.6L SOHC MFI (1999)
2. Remove the boot bands. Take care not to damage the boot.
-
If the boot band is a locking tab type, pry up the locking tabs with a screwdriver, and raise the end of the band.
-
If the boot band is a welded type, cut the boot band.
-
If the boot band is a crimping type, pry up the end of the band with a screwdriver.
-
If the boot band is a double loop type, lift up the band bend.
3. Mark each roller and inboard joint to identify the locations of rollers and grooves in the inboard joint. Then remove the inboard joint on the shop
towel, Be careful not to drop the rollers when separating them from the inboard joint.
