Civic VP Sedan L4-1590cc 1.6L SOHC MFI (1999)
Note these items during reassembly:
-
Clean the disassembled parts with solvent, and dry them thoroughly with compressed air. Do not wash the rubber parts with solvent.
-
GREASE: Thoroughly pack the inboard joint and both joint boots with the joint grease included in the new driveshaft set.
Inboard Joint Side:
1. Wrap the splines with vinyl tape to prevent damage to the boots and dynamic damper.
2. Install the dynamic damper and inboard boot to the driveshaft, then remove the vinyl tape. Take care not to damage the boots.
