Civic VP Sedan L4-1590cc 1.6L SOHC MFI (1999)
10. If necessary position the dynamic damper as shown.
-
Install a new dynamic damper band, and bend down both sets of locking tabs.
-
Lightly tap on the doubled-over portion of the band to reduce its height.
11. Set the double loop band onto the boot and dynamic damper with the band end toward to front of the vehicle.
12. Pull up the slack in the band by hand.
13. Mark a position on the band 10 - 14 mm (0.4 - 0.6 inch) from the clip.
14. Thread the free end of the band through the nose section of the boot band tool and into the slot on the winding mandrel.
