Civic Wagon 4WD L4-1590cc 1.6L SOHC (D16A6) MFI (1989)
Starter Relay: Testing and Inspection
Mitsuba Starters
Fig. 8 Starter Relay Terminal Locations
Vehicles w/Manual Transmission
1.
Remove and disconnect starter relay.
2.
Apply battery voltage to C and D terminals of relay as shown in Fig. 8.
3.
Check continuity between A and B terminals of relay, continuity should exist.
4.
Disconnect battery voltage, there should be no continuity between A and B terminals of relay.
5.
If relay does not operate as specified, replace relay.