CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Rear Bumper: Service and Repair
Rear Bumper Removal/Installation
CAUTION: Put on gloves to protect your hands.
NOTE:
-
An assistant is helpful when removing and installing the rear bumper.
-
Take care not to scratch the rear bumper and body.
Installation is the reverse of the removal procedure.
NOTE:
-
If necessary, replace any damaged clips.
-
Make sure the side marker light connectors are plugged in properly.
-
Make sure the rear bumper engages the side clips on each side securely.