CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
-
Apply brake cylinder grease (P/N: 08733 - B020E) or equivalent rubber grease to the sliding surfaces as shown.
-
Apply Molykote 44MA to the brake shoe ends and opposite edges of the shoes as shown.
16. Install the brake shoes onto the backing plate. Be careful not to damage the wheel cylinder dust covers.
17. Install the tension pins and the retainer springs.
18. Hook the upper return spring with the tool.
WARNING: Wear eye protection when using the brake spring wrench.
19. Install the brake drum.
20. If the wheel cylinder has been removed, bleed the brake system.
21. Depress the brake pedal several times to set the self-adjusting brake.
22. Adjust the parking brake.
