CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
7. Remove, drain and reinstall the reservoir. Fill the tank halfway to the MAX mark with water, then up to the MAX mark with antifreeze.
8. Mix the recommended antifreeze with an equal amount of water in a clean container.
NOTE:
-
Always use Genuine Honda Antifreeze/Coolant. Using a non-Honda coolant can result in corrosion, causing the cooling system to malfunction
or fail.
-
For best corrosion protection, the coolant concentration must be maintained year-round at 50% minimum. Coolant concentrations less than
50% may not provide sufficient protection against corrosion or freezing. Coolant concentrations greater than 60% will impair cooling
efficiency and are not recommended.
-
Do not use additional rust inhibitors or anti-rust products; they may not be compatible with the coolant.
Engine Coolant Refill Capacity [including 0.6 ltr. 10.63 US quart 0.53 Imp quart) for heater and reservoir]:
A/T: 3.9 ltr. (4.1 US quart, 3.4 Imp quart)
M/T: 4.0 ltr. (4.2 US quart, 3.5 Imp quart)
