CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Daytime Running Lamp Resistor: Testing and Inspection
CAUTION: The daytime running lights resistor becomes very hot when the daytime running lights are on; do not touch it or the attaching hardware
immediately after the lights have been turned off.
1. Disconnect the 3P connector from the resistor.
2. Measure the resistance between the resistor terminal No.1 (or No.2) and the power terminal No.3.
Resistance: 1.0 - 2.0 ohm
3. Replace the resistor with a new one if any of the resistances are beyond specification.