CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Center Anchor Bolt Construction
4. Remove the center anchor bolt, then remove the seat belt buckle. Pull out the seat belt switch harness (with seat belt switch).
5. Installation is the reverse of the removal procedure.
NOTE: Assemble the washers on the center anchor bolt as shown.
Front Seat Belt Buckle
Seat Belt Buckle
1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the preset buttons.
2. Disconnect the negative battery cable, and wait at least 3 minutes before beginning work.
3. Remove the front seat.
4. If equipped, remove the center table.
5. Remove the storage box.
6. Remove the center cover, driver's, passenger's.
