CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
4. Install the mounting bracket over the mounting cushion, then install the two gearbox mounting bolts. Position the split portion of the mounting
cushion as shown
5. Install the stiffener plate with the two gearbox mounting bolts and stiffener plate attaching bolts. Be sure the air tube is not caught or pinched by
stiffener plate. Install the bolts loosely first, then tighten them securely.
NOTE: With 2WD continue to step 11.
6. With 4WD, lower the jack, and return the engine to the original position.
