CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Ball Joint: Service and Repair
Lower
Ball Joint
Replacement
1. Remove the knuckle.
2. Remove the boot by prying the set ring off.
3. Check the boot for deterioration and damage, and replace it if necessary.
4. Install the special tools on the ball joint, and tighten
5. Position the special tools over the ball joint as shown, then set the assembly in a vise. Press the ball joint out of the knuckle.
6. Place the ball joint in position by hand.
7. Install the special tools over the ball joint as shown, then press the ball joint in.