CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Vehicle Lifting: Service and Repair
Front
Rear
Floor Jack
1. Block the rear wheels when raising the front of the vehicle; block the front wheels when raising the rear of the vehicle.
Place the blocks behind and ahead of the wheels.
2. Raise the vehicle high enough to insert the safety stands.
3. Adjust and place the safety stands so the vehicle will be approximately level, then lower the vehicle onto them.
WARNING: Always use safety stands when working on or under any vehicle that is supported by only a jack.
Never attempt to use a bumper jack for lifting or supporting the vehicle.
Lift and Safety Stands