CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
6. Fit the rollers to the spider with their high shoulders facing outward, and note these items:
-
Reinstall the rollers in their original positions on the spider by aligning the marks.
-
Hold the driveshaft pointed up to prevent the rollers from falling off.
7. Pack the inboard joint with the joint grease included in the new driveshaft set. Grease quantity: 120 - 130 g (4.2 - 4.6 oz)
8. Fit the inboard joint onto the driveshaft, and note these items:
-
Reinstall the inboard joint onto the driveshaft by aligning the marks on the inboard joint with the marks on the rollers.
-
Hold the driveshaft so the inboard joint points up to prevent it from falling off.
