CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Carrier Bearings: Service and Repair
Replacement
NOTE:
-
The tapered roller bearing and bearing outer race should be replaced as a set.
-
Inspect and adjust the tapered roller bearing preload whenever the tapered roller bearing is replaced.
-
Check the tapered roller bearings for wear and rough rotation. If the tapered roller bearings are OK, removal is not necessary.
1. Remove the tapered roller bearings using a bearing puller and a bearing separator as shown.
2. Install new tapered roller bearings using the special tool as shown.
NOTE: Drive the tapered roller bearings on until they bottom against the differential carrier.