CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
NOTE:
-
Do not apply glass primer to the body, and be careful not to mix up glass and body primer sponges.
-
Never touch the primed surfaces with your hands.
13. Before filling a cartridge, cut the end of the nozzle as shown.
14. Pack adhesive into the cartridge without air pockets to ensure continuous delivery. Put the cartridge in a caulking gun, and run a bead of adhesive
around the edge of the quarter glass as shown.
NOTE:
-
If the old quarter glass is to be reinstalled, peel the separator off the butyl tape after applying the adhesive.
-
Apply the adhesive within 30 minutes after applying the glass primer.