CR-V EX 4WD L4-2.4L (2002)
2.
Slide up the fuel fill pipe cover, and disconnect the fuel fill pipe hoses.
3.
Remove the fuel fill pipe attachment nuts.
4.
Install the new fuel fill pipe with the original nuts.
5.
Install the fuel fill pipe hoses with the original clamps. Make sure the fuel fill pipe cover is seated properly. Install the trunk lining.
6.
Connect the HDS to the vehicle's DLC (data link connector), and do an EVAP function test:
^
From the HDS main menu, select Honda System.
^
From the Honda System menu, select PGM-FI.
^
From the PGM-FI menu, select Inspection.
^
From the Inspection menu, select EVAP Test.
^
From the EVAP Test menu, select Function Test.
7.
Check the results of the EVAP function test.
^
If the vehicle passed the test, return it to the customer.
^
If the vehicle failed the test, do the DTC P1456 troubleshooting in section 11 of the 2002-04 S2000 Service Manual.
REPAIR PROCEDURE C - INSIGHT
1.
Remove the trunk lining and the cargo box. (See page 20-44 of the 2000-04 Insight Service Manual.)