CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Rear Door Panel: Service and Repair
Rear Door Panel Removal and Installation
NOTE: Take care not to scratch the door panel and other parts.
1. Remove the inner handle.
2. Remove the screws from the armrest. On '99 - 01 models, remove the screw from the beverage holder portion. Release the clips that hold the door
panel, then remove the door panel by pulling it upward.
NOTE: Remove the door panel with as little bending as possible to avoid creasing or breaking it.
3. Installation is the reverse of the removal procedure.