CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Technical Service Bulletin # 99-008
Date: 990112
Rear License Plate Trim Molding - Loose
99-008
January 12, 1999
Applies To: 1997 - 98 CR-V - ALL
Rear License Plate Trim Molding Is Loose
SYMPTOM
The rubber molding around the rear license plate trim is loose.
PROBABLE CAUSE
The adhesive that attaches the rubber molding has failed.
CORRECTIVE ACTION
Replace the rubber molding with the one listed under PARTS INFORMATION.
PARTS INFORMATION
Rubber Molding:
P/N 33702-Si 0-000, H/C 6111223
RECOMMENDED MATERIALS
3M General Purpose Adhesive Cleaner:
3M P/N 051135-08984
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Operation number:
823107
Flat rate time:
0.5 hour
Failed part:
P/N 33702-S10-000
H/C 6111223
Detect code:
025
Contention code:
AO1
Template ID:
99-008A
Skill level:
Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.
Repair Procedure
1.
Remove the rear license plate.
2.
Remove the tailgate door panel.
