CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
6.
Align the new front and rear cross bars with the arrow stickers on the bottoms of the side rails, then securely tighten the knobs.
7.
Reinstall the rear supports on the ends of the side rails with the original Torx screws.
8.
Reinstall the roof rack on the roof. Torque the 12 screws to 9 N.m (7 lb-ft).
9.
Test-drive the vehicle to make sure that the noise is gone.
Disclaimer