CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Brake Drum: Testing and Inspection
WARNING:
-
Never use an air hose or dry brush to clean brake assemblies.
-
Use an OSHA approved vacuum cleaner to avoid breathing brake dust.
-
Contaminated brake linings or drums reduce stopping ability.
-
Block the front wheels before jacking up the rear of the vehicle.
1. Block the front wheels, loosen the rear wheel nuts slightly, then raise the vehicle and support it on safety stands. Remove the rear wheels.
2. Release the parking brake, and remove the rear brake drum.
3. Check the wheel cylinder for leakage.
4. Check the brake linings for cracking, glazing, wear and contamination.
