CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Air Register: Service and Repair
Side Defogger Trim
Side Defogger Trim Removal and Installation
CAUTION:
-
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts to prevent damage.
-
Put on gloves to protect your hands.
NOTE: Take care not to scratch the dashboard and related parts.
1. Driver's side: Remove the side air vent.
2. Driver's side: Gently push out the clips from side air vent opening by hand, then pull out the side defogger trim. Disconnect the connector.
Passenger's side: Carefully insert a flat-tip screwdriver under the clips, then pull out the side defogger trim while prying up the clips.
3. Installation is the reverse of the removal procedure.