CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
All in-line, pigtail, and fuse box connectors are numbered (0725, 0416, etc.). Component connectors are not numbered but are identified either by the
name of the component if the component only has one connector or by a capital letter (A, B, 0, etc.) if the component has more than one connector.
Below most connector numbers and component names are PHOTO and VIEW numbers. The PHOTO number refers to a photo in the connector view
section of the database. This shows the connector's location on the car. The VIEW number refers to an illustration in the connector view section, that
shows the connector face, wire colors, connector cavity numbers, and other details. The connector cavity numbering sequence begins at the top left
corner of the connector. Disregard any numbers molded into the connector housing.
Wires
Wires are identified by the abbreviated names of their colors; the second color is the color of the stripe. Wires are also identified by their location in a
connector. The number "2" next to the male and female wire terminals at 0416, for example, means those terminals join in cavity 2 of connector 0416.
Component Locations
To see where a component or connector is located on the car, look up its photo number in the Component Location section. The photo will also tell you
the color of the connector, and how many cavities it has.
If there is no photo number below or beside a component name or a connector, ground, or terminal number, look up that name or number in the
appropriate Connector Identification Chart. The chart lists how many cavities a connector has, where it's located, and what it connects to. The related
illustration shows the connector's location on the harness, and the harness routing.
Connector Views
