CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
6. Remove the mounting bolts, then remove the condenser by lifting it up as shown. Be careful not to damage the radiator and condenser fins when
removing the condenser.
7. Install in the reverse order of removal. Make note of the following items.
-
If you're installing a new condenser, add refrigerant oil (SP-10).
-
Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them. Be sure to use the right
O-rings for HFC-134a (R-134a) to avoid leakage.
-
Be careful not to damage the radiator and condenser fins when installing the condenser.
-
Be sure to install the lower mount cushions of condenser securely into the holes.
-
Charge the system, and test its performance.
