honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

ABOUT US
Lock-up Control Solenoid Valve <--> [Torque Converter Clutch Solenoid, A/T] > < Electrical Specifications|Page 5105

CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)

Page 1
background image

Throttle Valve Solenoid: Service and Repair

1. Remove the mounting bolts and the linear solenoid assembly.
2. Clean the mounting surface and fluid passage of the linear solenoid assembly and transmission housing.
3. Install a new linear solenoid assembly with a new gasket. Do not pinch the gasket during installation and make sure it is installed properly in the

mounting groove of the linear solenoid.

4. Check the linear solenoid connector for rust, dirt or oil, then connect it securely.

Lock-up Control Solenoid Valve <--> [Torque Converter Clutch Solenoid, A/T] > < Electrical Specifications|Page 5105